ResMed C16389 - Manual (Page 41)

36
Table 2: Displayed values
* Results may be inaccurate in the presence of leaks.
** The displayed values are estimates. They are provided for trending purposes only.
Table 3: Maximum low impedance flow at stated pressures
Note: The manufacturer reserves the right to change these specifications
without notice.
Symbols which appear on the product
Attention, consult accompanying documents
Class II equipment
Type CF equipment
Drip Proof
Start/Stop or Mask-Fit
Value Range Accuracy Display Resolution
Pressure sensor at air outlet
Pressure -5 to 30 cm H
2
O ±0.5 cm H
2
O 0.1 cm H
2
O
Flow sensor in flow generator*
Leak 0–120 L/min ** 1 L/min
Tidal volume 100–3000 mL ** 1 mL
Respiratory rate 6–60 BPM ±0.5 BPM 0.1 BPM
Minute ventilation 0.6–60 L/min ** 0.25 L/min
Pressure
(cm H
2
O)
Flow
(L/min)
6.6 177
13.2 202
20.0 202
Start/S
top
Mask-fit
268106r1.book Page 36 Thursday, November 30, 2006 2:35 PM