ResMed C16389 - Manual (Page 25)

20
Menus with a ResLink and Oximeter
If your clinician has recommended that you use a ResLink module, and the
ResLink and an oximeter are connected to the VPAP Malibu, then display of
SpO
2
(oxygen saturation) and HR (heart rate) takes priority. If treatment has not
commenced, the VPAP Malibu will display one of the following screens, whether
a humidifier is connected or not:
Figure 3: Menu display with ResLink and oximeter
Max Ramp off Max Ramp set Max Settle set
or to non-zero value to non-zero value
Max Settle off
Prior to starting treatment:
RAMP: 20min 98%
menu HR: 60 SpO2 : 98%
menu HR : 60 SETTLE: 20min 98%
menu HR: 60
268106r1.book Page 20 Thursday, November 30, 2006 2:35 PM