ResMed C16389 - Manual (Page 24)

19 Preparing for Use
En
glish
Figure 1: VPAP Malibu Menu Series
Notes:
• The Settling and Ramp screens are only available if Max Settle or Max Ramp
has been set by a clinician.
• The Exhalation screen is only available if enabled by a clinician.
Menus with a Humidifier
If the HumidAire 2i is connected to the VPAP Malibu, and treatment has not
commenced, the VPAP Malibu will display one of the following screens:
Figure 2: Menu display with humidifier
VSet mode S mode & CPAP mode
SETTLE: 20min
menu
000/000days exit
USED: 0000hrs
SW: SX3650201
exit
RAMP: 30min
menu
EXHALATION: MED
change exit
Max Ramp set to 0 CPAP and S modes VSet mode
or
Max Settle set to 0
Prior to starting treatment:
After starting treatment:
RAMP : 20min
menu warmup VPAP Malibu
menu warmup SETTLE : 20min
menu warmup
VPAP Malibu
menu
Note: The VPAP Malibu screen displays for three seconds, then defaults to the
treatment screens (see “Starting Treatment” on page 19).
268106r1.book Page 19 Thursday, November 30, 2006 2:35 PM