Roberts Radio WiFi Internet Radio WM-202 - Manual (Page 4)

Before you can use this product
Before you can use your Internet radio, you must have the following:
● A broadband Internet connection.
● A wireless access point (WiFi) or a wired Ethernet connection connected
to your broadband Internet Service Provider, preferably via a router.
In many cases the broadband modem, router and wireless access
point will be a single combined unit supplied by your Internet Service
Provider or bought from a computer store.
● If your wireless network is configured to use Wired Equivalent Privacy
(WEP) or WiFi Protected Access (WPA/WPA2) data encryption then
you need to know the WEP or WPA key so you can get the Internet
radio to communicate with the network.
The Internet radio will typically work within a 10-20 metre radius from your
wireless access point. The actual range achieved will depend upon the
building type, other nearby wireless networks, and possible interference
sources. DAB and FM radio functions can operate wherever the radio is
able to receive a suitable broadcast signal.
IMPORTANT: Before you continue, make sure that your wireless access
point or router is powered up and working with your broadband Internet
service (use your computer to verify this). To get this part of the system
working you must read the instructions supplied with the wireless access
point or router.
3
WM-202 iss 1.indd 4 20/02/2008 13:03:27