Roberts Radio WiFi Internet Radio WM-202 User Manual

Page 14

Connecting to your computer network - contd.

If you have followed the steps on the preceding pages successfully, your radio will have connected to your

router, and then made a connection to the Internet and set its clock. If this is the case, then you can try

listening to radio stations via the Internet as described on page 15 onwards.

Changing the network connection

In the sections above, you chose how your radio would be connected, either using a WiFi connection, or using

a wired Ethernet cable. From time to time, you may ﬁnd that you need to connect differently, or to different

computer networks. The Internet setup menu allows you to conﬁgure your radio’s network settings, scan

for a connection to an alternative wireless network, or to manually conﬁgure the network parameters.
The steps outlined below describe how you can do this. If you have no need to do this, however, please

skip to page 15.

Conﬁguring the radio to use the wired Ethernet connection

1. From the radio’s Internet setup menu, select 'Wizard'. This menu will present you with details of any

WiFi networks. Scroll down the list using the Tuning/Select control to the '[Wired]' options. Press the

control to select this.

The radio will switch to using its Ethernet connection to communicate with the network. By default

the radio will acquire an IP address from your router using DHCP. This will require your radio to be

physically connected to a wired Ethernet using the RJ-45 socket at the back of the radio.

Conﬁguring the radio to use the WiFi connection

2. From the radio’s Internet setup menu, select 'Wizard'. This menu will present you with details of any

WiFi networks which are found. Scroll down the list using the Tuning/Select control to desired network

name. Press the control to select this.

The radio will switch to using its WiFi system to communicate with the network. Depending on the

network settings you may need to enter an encryption key (see page 11). By default the radio will

acquire an IP address from your router using DHCP.

>Wizard

PC settings

View settings

Manual settings

Network wizard

Scanning...

Smith

[Rescan]

>[Wired]

[Manual config]

WM-202 iss 1.indd 14

20/02/2008 13:03:34