Ricoh PRIPORT JP730 - Manual (Page 50)

Troubleshooting
44
4
❖ ❖ ❖ ❖ When the open cover/unit indicator (M M M M) lights up
❖ ❖ ❖ ❖ When the supply/exchange indicators light up
- - - -When a service code (E-XX) is displayed
Turn the main switch off and on. If a service code appears again, contact your
service representative.
Note
❒ If a service code appears on the display after you turn the main switch off and
on a few times, do not continue turning it on and off. Leave the machine off.
❒ E04 might be displayed when you make masters continuously using the orig-
inals that have solid images. In the case, turn off the main switch and wait for
a while.
Indicator Meaning Page
M
Close the front door or the right side
cover. p.55 “When the Open Cover/Unit Indica-
tor (
M) Lights”
M and “M” Set the drum.
M and “D” Close the plotter cover.
M and “E” Close the master eject box.
Indicator Meaning Page
B and “A” Load more paper. p.37 “Loading Paper into the Paper Feed
Tray”.
j Load new ink cartridge. p.39 “When the Add Ink Indicator ( j)
Lights”.
C
Load new master roll. p.41 “Master Roll Replacement”.
k Empty master eject box. p.57 “When the Master Eject Indicator
(
k) Lights”.
Titanium_GB-F_FM.book Page 44 Thursday, December 26, 2002 10:13 AM