Ricoh PRIPORT JP730 - Manual (Page 33)

Selecting Original Type
27
1
Selecting Original Type
Select one of the following two types
to suit your originals:
❖ ❖ ❖ ❖ Photo mode
Delicate tones of photographs and
pictures can be reproduced with
this mode.
❖ ❖ ❖ ❖ Letter mode
Select this mode when your origi-
nals contain only letters (no pic-
tures).
Note
❒ Moire patterns might occur when
screened originals are printed.
❒ When using Photo mode to print
originals with both letters and
photographs, the letters will ap-
pear lighter.
AAAA
Press the
{{{{Type of Original}}}} key to
select either Letter or Photo mode.
BBBB
Press the
{{{{Image Density}}}} key to ad-
just the image density.
CCCC
Place the original in the docu-
ment feeder.
DDDD
Press the
{{{{Master Making}}}} key.
EEEE
Check the image position on the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the {{{{Image
Position
}}}} key (see p.18 “Shifting
the Print Image Position For-
wards or Backwards”) or by
moving the position of the pa-
per (see p.19 “Shifting the Print
Image Position to the Right or
Left”).
FFFF
Make your prints.
Titanium_GB-F_FM.book Page 27 Thursday, December 26, 2002 10:13 AM