Ricoh Printer/Scanner Unit Type 8000 User Manual
Page 65
Specifying Scan to Folder Destinations
57
2
E
Enter the path for the folder.
If you set the connection type to [NDS], the NDS tree name is “tree”, the name of
the context including the volume is “context”, the volume name is “volume”, and
the folder name is “folder”, the path will be “\\tree\volume.context\folder”.
If you set the connection type to [Bindery], the NetWare server name is “server”,
the volume name is “volume”, and the folder name is “folder”, the path will be
“\\server\volume\folder”.
F
Press [OK].
G
Enter the user name for logging on to the NDS tree or NetWare server.
Press [Manual Entry] to the right of the user name field. The soft keyboard appears.
If you press [NDS] for [Connection Type], enter the user name, and then enter the
name of the context containing the user object. If the user name is “user” and
the name of the Context is “context”, the user name will be “user.context”.
H
If a password is specified for the log on user, enter it.
Press [Manual Entry] to the right of the password field. The soft keyboard appears.
I
Press [Connection Test].
A connection test is performed to check whether the specified share folder exists.
J
Check the connection test result, and then press [Exit].
K
Press [OK].
Note
❒ If you change the protocol after entering the path name, user name, or
password, a confirmation message appears.
❒ To change a registered path to a destination folder, press [Edit] to the left to
the destination field to display the soft keyboard, enter the correct path to
the folder, and then press [OK].
❒ You can connect only to folders that you have the read privileges for.
❒ The connection test may take time.
❒ You may not be able to press [Connection Test] right after pressing [Cancel]
during a connection test.
❒ Even if the connection test was successful, the machine may fail to transfer
the file if you do not have write privileges for the file or there is not enough
free hard disk space.
❒ You can register the path to the destination in the machine’s address book.
For details, see “Registering the Path to the Selected Destination in the Ad-
dress Book”.
Reference
p.60 “Registering the Path to the Selected Destination in the Address
Book”