Ricoh Printer/Scanner Unit Type 8000 - Manual (Page 161)

Software Supplied on CD-ROM
153
7
Software Supplied on CD-ROM
This section explains the applications on the supplied CD-ROM.
Quick Install
This section explains the auto-run program.
When the CD-ROM is inserted into a client computer running Windows
2000/XP/Vista or Windows Server 2003/2003 R2, the installer starts up auto-
matically (auto run) to install various software.
Note
❒ When installation under Windows 2000/XP/Vista or Windows Server
2003/2003 R2, log on as an Administrators group member.
❒ Quick Install may not automatically work with certain operating system set-
tings. If this happens, start “Setup.exe” on the CD-ROM root directory.
❒ To disable auto-run, set CD-ROM while pressing Shift key. Keep the Shift
key pressed until the computer finishes reading from the CD-ROM.
❒ If [Cancel] is pressed during installation, the installation of all the software
thereafter will be stopped. If cancelled, reinstall the remaining software after
restarting the client computer.
TWAIN Driver
This section tells you the file path to the TWAIN driver and the TWAIN driver's
system requirements.
You must install this driver if you want to scan originals or use the machine as a
network TWAIN scanner.
❖ File path
The TWAIN driver is stored in the following folder on the CD-ROM:
\DRIVERS\TWAIN
❖ System requirements
• Computer hardware
PC/AT-compatible machines that support the operating system properly
This driver cannot be used in RISC-based processor (MIPS R series, Alpha
AXP, or PowerPC) Windows NT environments.
• Operating system
Microsoft Windows 2000/XP/Vista
Microsoft Windows Server 2003
Microsoft Windows Server 2003 R2
• Display resolution
800×600 pixels, 256 colors or higher