Runco CL-810 CL-810 Ultra Cl-810 CineWide CL-810 / SDC-1 - Manual (Page 63)

Maintenance and Troubleshooting
Runco CL-810 Series Owner’s Operating Manual 51
PRE
L
IMINAR
Y
TEMP and LAMP LEDs are
both flashing red. • The lamp cover is open.
• Fans are not working
properly.
• Close the lamp cover.
• Please contact your Runco
dealer for assistance.
LAMP LED lights solid red. • The lamp has failed or
exceeded its usage life.
• Replace the lamp with a
new one.
TEMP LED lights solid red. • CL-810 internal
temperature is too high.
• Power off the CL-810 and
allow it to cool down.
Ensure that the intake and
exhaust vents are not
blocked. Turn the
projector back on. If the
problem persists, please
contact your Runco dealer
for assistance.
Table 5-1. Troubleshooting Chart (continued)
Symptom Possible Cause(s) Solution