Connecting source components to the cl-810, If your installation does not include an sdc-1, Hdmi/dvi connections – Runco CL-810 CL-810 Ultra Cl-810 CineWide CL-810 / SDC-1 User Manual

Page 36: Figure 3-7 . hdmi/dvi source connections, 7. hdmi/dvi source connections, Pre l iminar y

Text mode
Original mode

Installation

Runco CL-810 Series Owner’s Operating Manual

PRE

IMINAR

Connecting Source
Components to the

CL-810

If your installation does not include an SDC-1: Connect your video sources to the
CL-810 as shown and described in the sections that follow.

HDMI/DVI Connections: See Figure 3-7. With an HDMI source, use the included
HDMI-to-HDMI cable; with a DVI source, use the included DVI-to-HDMI cable.

Figure 3-7. HDMI/DVI Source Connections

➤

Use the HDMI input whenever possible. This ensures the highest
video quality because the signal is carried in the digital domain
throughout the entire signal path, from source component output
into the projector.

Tip