Ricoh Caplio RX - Manual (Page 108)

108
7
Changing Auto Power-
Off Settings (AUTO
POWER OFF)
If you do not operate the camera for the set
period of time, it will shut off automatically
(Auto Power-off) to conserve battery power.
At the time of purchase, Auto Power-Off is
set to one minute, but you can change this
setting.
To change the Auto Power-Off setting, follow
the steps below.
1.
Turn the Mode Dial to 1 1 1 1
(Setup Mode).
The Setup Screen appears.
2.
Press the " " " " button to select
[AUTO POWER OFF].
3.
Press the #$ #$ #$ #$ buttons to select
the desired setting.
This setting will be used until you change
it.
• When Auto Power-Off turns off the cam-
era, just press the power button again to
turn it on and resume use.
• The Auto Power-off function does not work
when the camera is connected to a com-
puter.
• When shooting with Interval Shooting, set-
tings made here are not valid and Auto
Power-Off does not work.
Possible Settings
OFF (The Auto Power-Off function does not work)
1 Minute (Default)
5 Minutes
30 Minutes