Ricoh LD435c - Manual (Page 81)

File Transfer
73
2
❖ E-mail Communication Port
Specify the port numbers for receiving Internet faxes. The specified POP3
port number is used for [POP before SMTP].
• POP3: 110
• IMAP4: 143
• SMTP: 25
Enter a port number between 1 and 65535 using the number keys, and then
press the {q} key.
❖ E-mail Reception Interval
Specify, in minutes, the time interval for receiving Internet faxes via POP3 or
IMAP4 server.
• On: 15 minute(s)
• Off
If [On] is selected, the time interval can be set from 2 to 1440 minutes in incre-
ments of one minute.
❖ Max. Reception E-mail Size
Specify the maximum reception e-mail size for receiving Internet faxes.
• 2MB
Enter a size from one to 50 MB in increments of one megabyte.
❖ E-mail Storage in Server
Specify whether or not to store received Internet fax e-mails on the POP3 or
IMAP4 server.
• Off
• All
• Errors Only
❖ Default User Name / Password (Send)
Specify the user name and password required when sending scan files direct-
ly to a shared folder on a computer running Windows, to an FTP server, or to
a NetWare server.
• SMB User Name
• SMB Password
• FTP User Name
• FTP Password
• NCP User Name
• NCP Password
Enter in up to 64 characters.