Ieee 802.11b (wireless lan) – Ricoh LD435c User Manual
Page 43
Network Settings
35
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using Document Server function with
an IEEE 802.11b (wireless LAN) connection.
For details about how to specify the settings, see "Interface Settings".
Note
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒ [IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
Menu
User Tool
Setting Requirements
Interface Settings/Network
Machine IPv4 Address
Necessary
Interface Settings/Network
IPv4 Gateway Address
As required
Interface Settings/Network
DNS Configuration
As required
Interface Settings/Network
DDNS Configuration
As required
Interface Settings/Network
Domain Name
As required
Interface Settings/Network
WINS Configuration
As required
Interface Settings/Network
Effective Protocol
Necessary
Interface Settings/Network
LAN Type
As required/Necessary
Interface Settings/Network
Permit SNMPv3 Communication
As required
Interface Settings/Network
Permit SSL/TLS Communication
As required
Interface Settings/Network
Host Name
As required
Interface Settings/
IEEE 802.11b
Communication Mode
Necessary
Interface Settings/
IEEE 802.11b
SSID Setting
As required
Interface Settings/
IEEE 802.11b
Channel
As required
Interface Settings/
IEEE 802.11b
Security Method
As required
Interface Settings/
IEEE 802.11b
Transmission Speed
As required