Settings required to use document server, Ethernet – Ricoh LD435c User Manual
Page 41
Network Settings
33
1
Note
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒ [IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
Settings Required to Use Document Server
This section lists the settings required for using Document Server function under
the network environment.
Ethernet
This section lists the settings required for using Document Server function with
an Ethernet connection.
For details about how to specify the settings, see "Interface Settings".
Interface Settings/Network
Permit SSL/TLS Communication
As required
Interface Settings/Network
Host Name
As required
Interface Settings/
IEEE 802.11b
Communication Mode
Necessary
Interface Settings/
IEEE 802.11b
SSID Setting
As required
Interface Settings/
IEEE 802.11b
Channel
As required
Interface Settings/
IEEE 802.11b
Security Method
As required
Interface Settings/
IEEE 802.11b
Transmission Speed
As required
Menu
User Tool
Setting Requirements
Interface Settings/Network
Machine IPv4 Address
Necessary
Interface Settings/Network
IPv4 Gateway Address
As required
Interface Settings/Network
DNS Configuration
As required
Interface Settings/Network
DDNS Configuration
As required
Interface Settings/Network
Domain Name
As required
Interface Settings/Network
WINS Configuration
As required
Interface Settings/Network
Effective Protocol
Necessary
Menu
User Tool
Setting Requirements