Ieee 1394 (ipv4 over 1394) – Ricoh LD435c User Manual
Page 34
Connecting the Machine
26
1
Note
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
Reference
p.59 “Interface Settings”
p.69 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending files with an IEEE 1394 connection.
For details about how to specify the settings, see "Interface Settings" and "File
Transfer".
Note
❒ [IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
Reference
p.59 “Interface Settings”
p.69 “File Transfer”
Menu
User Tool
Setting Requirements
Interface Settings/IEEE 1394 IPv4 Address
Necessary
Interface Settings/IEEE 1394 DDNS Configuration
As required
Interface Settings/IEEE 1394 Host Name
As required
Interface Settings/IEEE 1394 Domain Name
As required
Interface Settings/IEEE 1394 WINS Configuration
As required
Interface Settings/IEEE 1394 IPv4 over 1394
Necessary
Interface Settings/Network
IPv4 Gateway Address
Necessary
Interface Settings/Network
DNS Configuration
As required
Interface Settings/Network
Effective Protocol
Necessary
File Transfer
Scanner Resend Interval Time
As required
File Transfer
Number of Scanner Resends
As required