Ricoh LD435c - Manual (Page 175)

Special Senders to Treat Differently
167
4
Print 2 Sided
Specify when programming a Special Sender.
A
Press [2 Sided Print per Sender].
B
Press [On] or [Off], and then press [OK].
Note
❒ Selecting [Same as Basic Settings] will result in the same setting made for "2
Sided Print" of "Reception Settings".
Memory Lock
Specify when programming a Special Sender.
A
Press [Memory Lock Reception per Sender].
B
Press [On] or [Off], and then press [OK].
Note
❒ Selecting [Same as Basic Settings] will result in the same setting made for
"Program Memory Lock ID" under "Administrator Tools".
Paper Tray per Sender
Specify when programming a Special Sender.
A
Press [Paper Tray per Sender].
B
Select the tray you want to use, and then press [OK].
Note
❒ Selecting [Same as Basic Settings] will result in the same setting made for
"Paper Tray" of "Reception Settings".