Ieee 1394 (ipv4 over 1394), Ieee 802.11b (wireless lan) – Ricoh LD435c User Manual
Page 40
Connecting the Machine
32
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using network TWAIN Scanner with
an IEEE 1394 connection.
For details about how to specify the settings, see "Interface Settings" and "File
Transfer".
Note
❒ [IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
Reference
IEEE 802.11b (wireless LAN)
This section lists the settings required for using network TWAIN Scanner with
an IEEE 802.11b (wireless LAN) connection.
For details about how to specify the settings, see "Interface Settings".
Menu
User Tool
Setting Requirements
Interface Settings/IEEE 1394 IPv4 Address
Necessary
Interface Settings/IEEE 1394 DDNS Configuration
As required
Interface Settings/IEEE 1394 Host Name
As required
Interface Settings/IEEE 1394 Domain Name
As required
Interface Settings/IEEE 1394 WINS Configuration
As required
Interface Settings/IEEE 1394 IPv4 over 1394
Necessary
Interface Settings/Network
IPv4 Gateway Address
As required
Interface Settings/Network
DNS Configuration
As required
Interface Settings/Network
Effective Protocol
Necessary
Menu
User Tool
Setting Requirements
Interface Settings/Network
Machine IPv4 Address
Necessary
Interface Settings/Network
IPv4 Gateway Address
As required
Interface Settings/Network
DNS Configuration
As required
Interface Settings/Network
DDNS Configuration
As required
Interface Settings/Network
Domain Name
As required
Interface Settings/Network
WINS Configuration
As required
Interface Settings/Network
Effective Protocol
Necessary
Interface Settings/Network
LAN Type
Necessary
Interface Settings/Network
Permit SNMPv3 Communication
As required