Ethernet – Ricoh LD435c User Manual
Page 36
Connecting the Machine
28
1
Settings Required to Use the Network Delivery Scanner
This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with an
Ethernet connection.
For details about how to specify the settings, see "Interface Settings" and "File
Transfer".
Note
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed.
When both ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
lected interface takes precedence.
❒ If Delivery Option is set to [On], check that IPv4 Address is specified.
Reference
p.59 “Interface Settings”
p.69 “File Transfer”
Menu
User Tool
Setting Requirements
Interface Settings/Network
Machine IPv4 Address
Necessary
Interface Settings/Network
IPv4 Gateway Address
As required
Interface Settings/Network
DNS Configuration
As required
Interface Settings/Network
DDNS Configuration
As required
Interface Settings/Network
Domain Name
As required
Interface Settings/Network
WINS Configuration
As required
Interface Settings/Network
Effective Protocol
Necessary
Interface Settings/Network
Ethernet Speed
As required
Interface Settings/Network
LAN Type
Necessary
Interface Settings/Network
Permit SNMPv3 Communication
As required
Interface Settings/Network
Permit SSL/TLS Communication
As required
Interface Settings/Network
Host Name
As required
File Transfer
Delivery Option
As required
File Transfer
Fax RX File Transmission
As required
File Transfer
Scanner Resend Interval Time
As required
File Transfer
Number of Scanner Resends
As required