Ricoh LD435c User Manual

Page 46

Connecting the Machine

❖ [Network] → [WINS Configuration] → [On] → [Secondary WINS Server]

• Web Image Monitor: Can be used for specifying the setting.
• SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
• telnet: Can be used for specifying the setting.

❖ [Network] → [WINS Configuration] → [On] → [Scope ID]

• Web Image Monitor: Can be used for specifying the setting.
• SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
• telnet: Can be used for specifying the setting.

❖ [Network] → [Effective Protocol] → [IPv4]

• Web Image Monitor: Can be used for specifying the setting.
• SmartDeviceMonitor for Admin: You can specify the TCP/IP settings if

SmartDeviceMonitor for Admin is communicating with the machine using
IPX/SPX.

• telnet: Can be used for specifying the setting.

❖ [Network] → [Effective Protocol] → [IPv6]

• Web Image Monitor: Can be used for specifying the setting.
• SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
• telnet: Can be used for specifying the setting.

❖ [Network] → [Effective Protocol] → [NetWare]

• Web Image Monitor: Can be used for specifying the setting.
• SmartDeviceMonitor for Admin: You can specify the IPX/SPX settings if

SmartDeviceMonitor for Admin is communicating with the machine using
TCP/IP.

• telnet: Can be used for specifying the setting.

❖ [Network] → [Effective Protocol] → [SMB]

• Web Image Monitor: Can be used for specifying the setting.
• SmartDeviceMonitor for Admin: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.

❖ [Network] → [Effective Protocol] → [AppleTalk]

• Web Image Monitor: Can be used for specifying the setting.
• SmartDeviceMonitor for Admin: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.

❖ [Network] → [NCP Delivery Protocol]

• Web Image Monitor: Can be used for specifying the setting.
• SmartDeviceMonitor for Admin: Can be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.