System reset, Restore saved settings, System reset, y – Runco Video Xtreme VX-2ix User Manual

Page 55: Restore saved settings in t, D restore saved settings

Runco VX-2ix Owner’s Operating Manual

System Reset: To reset ALL projector and controller settings (including image settings)
back to their factory defaults, choose System Reset from the Service menu.

A confirmation message appears, reminding you to save your settings before you perform
the reset, so that you can restore them afterwards. If you have done this, select Confirm to
continue with the reset. Otherwise, click Back to cancel.

Restore Saved Settings: Following a System Reset, select Restore Saved Settings to
apply all previously-saved settings to the projector.

This action is not undoable. Proceed with caution! Before you
perform a System Reset, save ALL settings, including “Custom” ISF
Presets (page 37), ISF Day/Night presets (page 39), Output Shift
settings (page 39), Input Names (page 40) and Trigger settings
(page 42).

Caution