2 quick setup, Table 3-1 . installation overview, Quick setup – Runco Video Xtreme VX-2ix User Manual
Page 26
14
Runco VX-2ix Owner’s Operating Manual
3.2
Quick Setup
Table 3-1 gives a quick overview of the VX-2ix installation process. The sections following
this one provide detailed instructions.
Installation should be performed by a qualified custom video
installation specialist.
Table 3-1. Installation Overview
Step
Procedure
For Details, Refer to
page...
1
Choose a location for the projector
2
Install CineWide (secondary anamorphic) lens (optional)
3
Connect signal sources to the projector
4
Connect external controller to RS-232 port (optional)
5
Connect AutoScope lens motor or other home theater
equipment to 12-volt trigger outputs (optional)
6
Apply power to the projector
7
For rear-screen and/or ceiling-mount installations, select
the proper picture orientation
8
Lens adjustments: projected image size (zoom), position
(shift) and focus
9
Projector calibration: adjust the following
for each input,
starting with Component SD; save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position
Note