Roland V-Piano - Manual (Page 86)

86
Detailed settings for various functions (Utility screen)
fig.UtilMIDI.eps
The V-Piano Rx Channel setting is stored in system memory. It cannot be individually stored in each setup.
fig.UtilAmb.eps
MIDI settings (5. MIDI)
Parameter Description Value Default Value
MIDI Tx Channel
Specifies the MIDI channel on which the V-Piano’s performance data is
transmitted via MIDI. If you want to use the V-Piano’s performance data to
play an external MIDI device, set the V-Piano’s transmit channel to match
the receive channel of the external MIDI device.
1–16 1
V-Piano Rx Channel
Specifies the V-Piano’s receive channel. If you want to use MIDI data from
an external MIDI device to play the V-Piano’s sounds, set the V-Piano’s
receive channel to match the transmit channel of the external MIDI device.
OFF, 1–16 1
Tx Bank Select (MSB) Specifies the Bank Select MSB that is transmitted when a setup is recalled. OFF, 0–127 OFF
Tx Bank Select (LSB) Specifies the Bank Select LSB that is transmitted when a setup is recalled. OFF, 0–127 OFF
Tx Program Change Specifies the Program Change that is transmitted when a setup is recalled. OFF, 1–128 OFF
Ambience settings (6. Ambience)
Parameter Description Value Default Value
Ambience Mode
Ambience settings can be individually stored in each
setup. When you switch setups, this setting specifies
whether the ambience settings will change to the
settings saved in that setup (SETUP) or will not change
(SYSTEM).
SETUP, SYSTEM SYSTEM
Ambience Type Selects the type of ambience.
ROOM 1, ROOM 2, ROOM 3,
STUDIO 1, STUDIO 2, STUDIO 3,
CLUB 1, CLUB 2, CLUB 3,
HALL 1, HALL 2, HALL 3
HALL 1
Ambience Level
Adjusts the ambience effect. This parameter is linked
with the [AMBIENCE] Knob.
0–127 40
V-Piano_e.book 86 ページ ２００９年１月２８日 水曜日 午前９時１０分