Roland V-Piano - Manual (Page 76)

76
Detailed settings for various functions (Utility screen)
1. From the Tone screen, press the [FUNCTION] button to turn Function on.
The [FUNCTION] button will light.
fig.Util-1.eps
2. Press the [F4 (UTILITY)] button.
fig.Util-2.eps
3. The Utility screen will appear.
Use the [F3 ( ▲ )] / [F4 ( ▼ )] buttons or the [VALUE] dial to select a group.
fig.Util02.eps
4. Press the [ENTER] button or the [F1 (ENTER)] button to see the parameters in that group.
5. Use the [F3 ( ▲ )] / [F4 ( ▼ )] buttons to select a parameter within the group.
fig.Util03.eps
6. Turn the [VALUE] dial to adjust the value.
You can press the [F2 (RESET)] button to return to the initial value.
Simply changing a value does not cause the change to be memorized. You must execute the Write operation to store your
change in the appropriate memory location for that parameter. Refer to “Parameters That Can Be Set” (p. 78) for the memory
locations and procedure for each parameter.
7. Press the [EXIT] button to return to the previous screen.
How to make settings
V-Piano_e.book 76 ページ ２００９年１月２８日 水曜日 午前９時１０分