Roland V-Piano - Manual (Page 25)

25
Getting ready
You can connect a CD drive (CD-01A; sold separately) to the USB memory connector, and perform while playing back a music CD.
You can also play back SMF music data saved on a CD-ROM (p. 64).
If you’re using the KS-V8 (a dedicated keyboard stand for the V-Piano), you can attach the CD-01A to the V-Piano’s bottom panel.
1. Set the POWER switch of the CD drive (CD-01A) to “AUTO.”
fig.CDDPowerSW.eps
2. Use screws (3 x 8 mm) to attach the holder to the CD drive.
* You must use only the screws (3 x 8 mm) and holder that were included with the CD-01A.
fig.CDDbracket.eps
3. Reattach the headphone hook in the location shown in the illustration.
Connecting a CD drive
Attaching the CD drive (CD-01A)
Screws (3 x 8 mm)
V-Piano_e.book 25 ページ ２００９年１月２８日 水曜日 午前９時１０分