Roland V-Piano - Manual (Page 38)

38
Playing
Equalizer settings are saved in system memory.
You can also store the equalizer settings in a setup. Refer to EQ Mode in “System settings (1. System)” (p. 80). If you’ve
chosen to store the equalizer settings in each setup, the equalizer settings will also be stored when you store the setup (p.
60).
1. From the Tone screen, press the [FUNCTION] button to turn Function on.
The [FUNCTION] button will light.
2. Press the [F4 (UTILITY)] button.
3. Use the [F3 ( ▲ )] or [F4 ( ▼ )] buttons to select “1. System.”
fig.Util02.eps
4. Press the [ENTER] button or the [F1 (ENTER)] button to access the system setting screen.
5. Press the [WRITE] button.
fig.Util-3.eps
6. A confirmation message will appear. To save the equalizer settings, press the [F4 (OK)] button.
The equalizer settings, as well as any system parameters you’ve edited will be saved in System memory.
If you decide to cancel without saving, press the [F1 (CANCEL)] button.
Saving the equalizer settings
V-Piano_e.book 38 ページ ２００９年１月２８日 水曜日 午前９時１０分