Roland RG-7 - Manual (Page 88)

87
Chapter 5. User Program Registration
Using the Pedal to Switch User
Programs
You can use the Pedal as a dedicated switch for selecting User Programs in order.
The User Programs are switched each time the pedal is pressed.
1
Press the [Function] (Exit) button, getting its indicator to light.
2
Press the [Song] (Select -) button or [ ] (Select +) button to display
the USER PROGRAM screen.
fig.
3
Press the [Song] (Select -) button or [ ] (Select +) button so that the
“Pedal Shift” is flashing.
fig.
4
Press the [ ] (Value -) button or [ ] (Value +) button to select the
pedal to be used for switching the Favorite performance settings.
5
Press the [Function] (Exit) button so the indicator goes out.
The User Programs are switched each time you press the pedal to which the function
of switching performance settings is assigned.
Value Description
Left
The left pedal is dedicated to switching User Programs.
The function assigned to the left pedal cannot be used.
Center
The center pedal is dedicated to switching User Programs.
The function assigned to the center pedal cannot be used.
Off
You can use a function assigned to the pedal.
You cannot use the Pedal as a dedicated switch for selecting
User Programs in order.
RG-7_e.book 87 ページ ２００５年２月１４日 月曜日 午前９時４５分