Roland RG-7 - Manual (Page 30)

29
Chapter 1. Playing Back Songs
Insert the CD in the CD Drive
1.
Press the eject button and open a disc tray.
fig.
2.
Put a CD on a disc tray.
3.
Press the eject button again to close the disc tray.
Removing a CD
1.
Press the eject button and open a disc tray.
2.
Remove the CD from the disc tray.
Playing Back Songs on CDs
You can play back the CD included with the RG-7, CDs with player piano CDs,
audio CDs, and CD-ROMs to which SMF music files are saved.
1.
Place the CD you want to play in the CD drive.
2.
Press the [Song] button one or more times to select “CD” as the genre.
If using the remote control, press the remote control’s [EXTERNAL] button, then
select “CD” as the genre.
Eject Button
Disc Tray
If a disc tray does not open
If the power is turned off with the disc still in the drive (such as due to a power
failure), the disc tray cannot be opened by pressing the eject button. In this case, you
can insert a piece of wire to force the tray open.
fig.
Make sure the RG-7’s power has been turned OFF before attempting to engage the
emergency eject hole. If you insert something while the power is on, the disc could
be damaged, or unexpected problems may occur.
Emergency Eject Hole
RG-7_e.book 29 ページ ２００５年２月１４日 月曜日 午前９時４５分