Roland RG-7 - Manual (Page 85)

84
Chapter 5. User Program Registration
6
Press the [ ] (Value -) button or [ ] (Value +) button to select the
“User Program to be loaded.”
7
Press the [Moving Key] (Enter) button.
8
Press the [Song] (Select -) button or [ ] (Select +) button so that the
“load User Program number” is flashing.
fig.
9
Press the [ ] (Value -) button or [ ] (Value +) button to select the
number for the User Program to be loaded.
10
Press the [Moving Key] (Enter) button.
A confirmation message appears in the screen.
fig.
To return to the original screen without loading the User Program, press the
[Function] (Exit) button.
11
Press the [Function] (Exit) button so the indicator goes out.
The selected User Program is loaded to the RG-7.
Display Description
User Memory Loads User Programs saved in the User Memory.
Ext Memory Loads User Programs saved in USB Memory.
NOTE
When calling up User
Programs saved in USB
memory, do not to remove
the USB memory from the
Ext Memory port until the
settings have been called
up.
RG-7_e.book 84 ページ ２００５年２月１４日 月曜日 午前９時４５分