Roland RG-7 User Manual
Page 83
82
Chapter 5. User Program Registration
7
Press the [Song] (Select -) button or [
] (Select +) button so that the
“User Program save-destination number” is flashing.
fig.
8
Press the [
] (Value -) button or [
] (Value +) button to select the
“User Program save-destination number.”
Value:
UPG Set 01-UPG Set 99
To return to the original screen without saving the User Program, press the
[Function] (Exit) button.
9
Press the [Moving Key] (Enter) button.
The User Program is saved to the User memory or USB memory.
10
Press the [Function] (Exit) button so the indicator goes out.
NOTE
Be sure not to turn off the
power as long as
“Executing...” is displayed.
Turning off the power at this
time may corrupt the USB
memory and/or User Memory
and render them unusable.
When deleting the set of saved
User Programs, refer to
When there is no User Program assigned to a number, this is indicated in the display
in the following form: “2: (Empty).”
fig.
The following appears in the screen if you attempt to save a User Program to a
number to which a User Program has already been saved.
fig.
If you save performance settings to a number that already has User Programs saved
to it, the previously saved User Programs are then deleted.
To delete the saved set of User Programs and save the new performance settings to
that number, press the [Moving Key] (Enter) button. If you do not want to delete the
saved User Programs, press the [Function] (Exit) button to cancel the save.
RG-7_e.book 82 ページ ２００５年２月１４日 月曜日 午前９時４５分