beautypg.com

Making the connections, Making midi-related settings, Midi send channel settings – Roland RG-7 User Manual

Page 101

background image

100

Chapter 7. Connecting External Devices

Making the Connections

NOTE

To prevent malfunction and/or damage to speakers or other

devices, always turn down the volume, and turn off the power

on all devices before making any connections.

1.

Turn the volume all the way down on the RG-7 and on

the device you’re about to connect.

2.

Switch off the power to the RG-7 and the device you’re

about to connect.

3.

Use a MIDI cable (sold separately) to connect the MIDI

connectors to each other.

Please refer to the connection examples below.

4.

Switch on the power to the RG-7 and the connected

device.

5.

Adjust the volume level on the RG-7 and the connected

device.

6.

You should also set the MIDI settings as needed.

For details on the MIDI-related settings, refer to previous
section.

Connection Examples:
Setup with a MIDI Sequencer

* When the RG-7 is connected to a MIDI sequencer, set it to

Local OFF. Refer to “Disconnecting the Internal Sound
Generator and Keyboard (Local Control)” (p. 101).

Connecting with a MIDI Sound Module

Making MIDI-related Settings

Here’s how you can set the transmit channel and other MIDI-
related settings.

MIDI Send Channel Settings

MIDI features sixteen MIDI channels, numbered 1–16.
Simply connecting a cable is not enough for communication
to take place. The connected devices must be set to use the
same MIDI channels. Otherwise, no sound will be produced,
and no sounds can be selected.

The RG-7 receives all channels 1–16.

1.

Press the [Function] (Exit) button, getting its indicator

to light.

2.

Press the [Song] (Select -) button or [

] (Select +)

button to display the MIDI screen.

3.

Press the [Song] (Select -) button or [

] (Select +)

button to get the value for “Tx Ch” (Transmit channel)

to flash.

4.

Press the [

] (Value -) button or [

] (Value +)

button to set the MIDI Transmit channel.

Value:

1–16

5.

Press the [Function] (Exit) button so the indicator goes

out.

Jack Panel of the RG-7

In

Out

MIDI

Roland MT Series

OUT

THRU

IN

MIDI

Sound Module

Jack Panel of
the RG-7

RG-7_e.book 100 ページ 2005年2月14日 月曜日 午前9時45分