Roland SP-404SX - Manual (Page 17)

17
D
eu
tsc
h
Fra
nç
ais
Italiano
Español
Por
tug
uês
N
eder
lands
English
Connecting a Mic
To use a mic, connect it to the MIC IN jack, then press the [MIC] button so it’s lit .
MIC IN jack
Press the [MIC] button so it’s lit .
MEMO
If you’re not using a mic, leave this button
unlit .
Using the built-in mic
If you want to use the built-in mic, don’t
connect anything to the MIC IN jack .
The built-in mic won’t operate if a mic is
connected to the MIC IN jack .
Howling could be produced depending on the location of
mics relative to speakers . This can be remedied by:
1 . Changing the orientation of the mic(s) .
2 . Relocating mic(s) at a greater distance from speakers .
3 . Lowering volume levels .
Importing WAVE fi les from your computer
By using the included “SP-404SX Wave Converter” software, WAV or AIFF fi les from your computer can be written to an SD
card and assigned to the pads of the SP-404SX .
For details, refer to “Importing Wave Files from Your Computer” (p . 22) .
Use the “SP-404SX Wave Converter” software on
your computer to copy the data to SD card
Load the data from SD
card into the SP-404SX
Card reader (sold separately)
WAV
AIFF