NEC NX7700i/5040H-32 - Manual (Page 91)

Base Module
855-900547-200 2-55
cmd arg1 arg2 arg3 arg4 Description
rowxzz - - - Enable the ROW.
x is a physical CELL number (0-7).
zz is a ROW number (00-15), which must
always be specified with a 2-digit number.
For the 32Way(H) model, the corresponding
Directory memory is also enabled.
There is no individual DIMM control. The
DIMM is automatically detected on boot-up.
dirxzz - - - For the 32Way(H) model, use this argument
to enable the Directory memory and the
corresponding ROW memory.
This command is invalid to the
32Way/8Way/ISPF models.
x is a physical CELL number (0-7).
zz is a Directory number (00-15), which must
always be specified with a 2-digit number.
There is no individual DIMM control. The
DIMM is automatically detected on boot-up.
tagx[sy
z] - - - Enable the TAG for 32Way(B)/8Way/ISPF
models.
x is a physical CELL number (0-7).
s should be either ‘e’ (EVEN side) or ‘o’
(ODD side).
y is a TAG Bank number (0-1).
z is a TAG Bank level number (0-5).
If s, y, and z are all omitted, all the TAGs
under the CELL Card specified by x are
enabled.
pcibx [all] - - Enable the PCI Bay.
x is the DGI/I2C cable port number (0-7) that
connects iSP to PCI Bay.
Always specify “all” for arg2, so that all the
subcomponents including the PCI Bay itself
are enabled.
[all] - - Enable the IOX.
x is a physical IOX number (0-7).
If arg2 is omitted, only the IOX is enabled,
with its subcomponents left disabled.
If “all” is specified for arg2, the IOX Card is
enabled including all of its subcomponents. ioxx
iocy - - Enable the IOC.
y is an IOC number (0 or 1) within an IOX.
gxbxy - - - Enable the GXB on the Core IO Card.
x is the DGI/I2C cable port number (0-7) that
connects iSP to PCI Bay.
y is a GXB number (0).
cpcixy - - - Enable the slots (1-2) on the Core IO Card.
x is a PCI Bay number (0-7).
y is a slot number (1-2).
pxhxy - - - Enable the PXH.
x is the DGI/I2C cable port number (0-7) that
connects iSP to PCI Bay.
y is a PXH number (0-3).
pcix0y - - - Enable the slots (1-8) on the PXH.
x is a PCI Bay number (0-7).
y is a slot number (1-8).