NEC NX7700i/5040H-32 - Manual (Page 71)

Base Module
855-900547-200 2-35
2.4.6. SP Command Reference
This section provides command reference describing the details of SP commands.
Command availability on the master iSP, backup iSP, and undetermined iSP is indicated on the
first page of each command.
(Legend)
m b u
X
m: Command validity on the master iSP. X denotes “valid.”
b: Command validity on the backup iSP. X denotes “valid.”
u: Command validity on the undefined iSP. X denotes “valid.”
The example above indicates that the commands are valid only if the iSP is assigned as the
master.
The SP commands and subcommands are not case-sensitive. For this reason, case-sensitive
data such as accounts and passwords is clearly indicated.
If the backup iSP card is configured (duplicated iSP configuration), the iSP command can also
be operated on the backup iSP.
[Note]
* When the following list (a list of codes indicating the system configuration) is included in the
command description, this system corresponds to 32Way:
• 8Way
• 32Way
• ISPF
If the above indication is omitted, this description is common across the system.