NEC NX7700i/5040H-32 - Manual (Page 159)

Operation Procedure
855-900547-200 3-30
3.5.7.6. Set Auto Boot Timeout
To change the timeout value until the next auto boot (TimeValue) from the default setting (10
seconds), select [Set Auto Boot Timeout] from the Main Menu. Specify the timeout value (in
seconds) in the Set Timeout Value option. If the value 0 (zero) is specified, the OS is booted
immediately. There are three ways to disable auto boot:
• Using the Delete/Disable Timeout menu.
• Setting the timeout value to 65535<0xFFFF>.
• Pressing a key when EFI is booting to disable the timeout count down. The timeout value
selected on the Set Timeout Value menu has been saved.
„ Image of the Set Auto Boot Timeout screen
EFI Boot M aintenance M anager ver 1.10 [14.62]
Set Auto Boot Tim eout. Select an Option
Set Tim eout Value
Delete/Disable Tim eout
H elp
Exit