NEC NX7700i/5040H-32 - Manual (Page 31)

System Overview
855-900547-200 1-5
Table 1-1 Base Module Specifications
Main Cabinet
CPU CAGE
CELL (up to 8 cells can be installed in the cabinet)
CPU
Processor Itanium2 processor (1.6GHz, 533MHz)
Max. No. of processors 32 (up to 4 in one cell)
Main memory
Unit of expansion 2GB/4GB/8GB
Capacity 2GB to 1TB
Crossbar Interconnect (up to 4 crossbar interconnects can be installed in the cabinet)
Methodology Crossbar switching
Max. bandwidth 204.8GB/s (25.6GB/s per cell)
I/O ENCLOSURE (up to 2 I/O enclosures can be installed in the cabinet)
I/O MODULE (up to 4 I/O modules can be installed in the cabinet)
Max. No. of PCI slots 64 slots (133MHz)
Max. I/O bandwidth 67GB/s
DVD-ROM unit
One unit can be installed in each I/O module (up to 4 units in
the cabinet)
DVD-ROM/CD-ROM mode selection
DAT unit
One unit can be installed in each I/O module (up to 4 units in
the cabinet)
DDS-4 4mm DAT unit
Magnetic disk unit
Up to 4 units can be installed in each I/O module (two units
when DAT is used)
(Up to 16 units can be installed in the cabinet.)
Selection from 73GB/146GB/300GB
POWER BAY (up to 2 units can be installed in the cabinet)
DPS (up to 6 units can be installed)
* In NX7700i/5040H-32, the maximum number of processors defined is 16, and consequently
up to 4 cells can be installed. According to this configuration, the number of I/O modules is
also halved. Namely, it is a half system of NX7700i/5080H-64. Since the figures in the
specifications are based on the maximum system configuration, those for NX7700i/5040-32
are not indicated.