NEC NX7700i/5040H-32 - Manual (Page 135)

Operation Procedure
855-900547-200 3-6
3.1.2. SP Console Messages
SP console messages displayed during system startup are explained below.
1) Example of SP console screen during SPFW boot
Integrated Service Processor.
Cabinet-ID:xx, Location:iSPy, State:ssssss
iSP login: spfw
<= Enter spfw and press Enter
iSP password: xxx <= Enter nec and press Enter
Copyright (C) 2006 NEC Corporation, All Rights Reserved.
Welcome to Integrated Service Processor.
iSP FW version : 01.00 generated on 01/01/2006 19:20:33
iSP MAIN MENU
0) OS(BIOS) serial console of partition#0 (SW INITIALIZING)
1) OS(BIOS) serial console of partition#1 (NOT CONFIGURED )
2) OS(BIOS) serial console of partition#2 (NOT CONFIGURED )
3) OS(BIOS) serial console of partition#3 (NOT CONFIGURED )
4) OS(BIOS) serial console of partition#4 (NOT CONFIGURED )
5) OS(BIOS) serial console of partition#5 (NOT CONFIGURED )
6) OS(BIOS) serial console of partition#6 (NOT CONFIGURED )
7) OS(BIOS) serial console of partition#7 (NOT CONFIGURED )
V) Virtual System Operator Panel
S) iSP commands
E) Exit
DISCONNECTALL) disconnect all console connections
iSPyz> s
<= Enter s and press Enter
***** SP Command Mode *****
***** enter ESC to do the command input effectively *****
***** enter CTRL+B to quit *****
<= Press ESC
iSPyz:---> => To SP Command Console