NEC HT1100 - Manual (Page 49)

E-49
Compatible Input Signal List
Signal Resolution Frequency H. Refresh Rate
Y/N Program ( Dots ) ( kHz ) ( Hz )
* 2 Y NTSC – 15.73 59.94
* 2 Y PAL – 15.63 50.00
* 2 Y PAL60 – 15.73 60.00
* 2 Y SECAM – 15.63 50.00
Y VESA 640 ן 480 31.47 59.94
Y MAC 640 ן 480 35.00 66.67
Y VESA 640 ן 480 37.86 72.81
Y VESA 640 ן 480 37.50 75.00
Y VESA 640 ן 480 43.27 85.01
Y IBM 720 ן 350 31.47 70.08
Y IBM 720 ן 350 39.44 87.85
Y IBM 720 ן 400 39.44 87.85
Y VESA 800 ן 600 35.16 56.25
Y VESA 800 ן 600 37.88 60.32
Y VESA 800 ן 600 48.08 72.19
Y VESA 800 ן 600 46.88 75.00
Y VESA 800 ן 600 53.67 85.06
Y MAC 832 ן 624 49.72 74.55
Y VESA 1024 ן 768 35.52 43.48 Interlaced
Y VESA 1024 ן 768 48.36 60.00
Y VESA 1024 ן 768 56.48 70.07
Y MAC 1024 ן 768 60.24 74.93
Y VESA 1024 ן 768 60.02 75.03
Y VESA 1024 ן 768 68.68 85.00
* 1 * 2 Y VESA 1152 ן 864 67.50 75.00
* 1 * 2 Y MAC 1152 ן 870 68.68 75.06
* 1 * 2 Y VESA 1280 ן 960 60.00 60.00
* 1 * 2 Y VESA 1280 ן 1024 63.98 60.02
* 1 * 2 Y MAC 1280 ן 1024 69.87 65.18
* 1 * 2 Y VESA 1280 ן 1024 79.98 75.02
* 1 * 2 Y VESA 1280 ן 1024 91.15 85.02
* 1 * 2 Y HDTV (1080p/60) 1920 ן 1080 67.50 60.00 progressive
* 1 * 3 Y HDTV (1080i/60) 1920 ן 1080 33.75 60.00 Interlaced
* 1 * 3 Y HDTV (1080i/50) 1920 ן 1080 28.13 50.00 Interlaced
* 1 * 3 Y HDTV (720p) 1280 ן 720 45.00 60.00 Progressive
* 3 Y SDTV (480p) – 31.47 59.94 Progressive
* 2 Y DVD YCbCr – 15.73 59.94 Interlaced
* 2 Y DVD YCbCr – 15.63 50.00 Interlaced
* 4 Y DVD progressive – 31.47 59.94 progressive
* 4 Y DVD progressive – 31.25 50.00 progressive
*1 : Images in above flagged with *1 are compressed with Advanced AccuBlend.
*2 : Images in above flagged with *2 are not supported for the DVI-digital signals.
*3 : Displayed only when "16:9" is selected in "Screen Type" on the DVI input.
*4 : Displayed either when "4:3" or "16:9" is selected in "Screen Type" on the DVI input.
The other signals than *2, *3 and *4 can be displayed when "4:3" is selected in "Screen Type".
NOTE: Some composite sync signals may not be displayed correctly.
Signals other than those specified in the table above may not be displayed correctly. If this should happen, change the refresh rate or
resolution on your PC. Refer to Display Properties help section of your PC for procedures.