NEC HT1100 - Manual (Page 22)

E-22
Turning Up or Down Volume
Sound level from the speaker on the projector can be adjusted when
the menu is not displayed.
increase volume
Volume bar
decrease volume
Turning off the Projector
To turn off the projector:
First press the POWER (ON/STAND BY) button on the projector cabi-
net or the POWER button on the remote control for a minimum of two
seconds.
LIGHT
COMPONENT
POWER
COMPUTER
VIDEO
MENU CANCEL
COMP.V
COMP. DVI
S-VIDEO
ENTER
The power indicator will glow orange. After the projector turns off, the
cooling fans keep operating for 90 seconds (Cooling-off time).
Second, turn off the Main Power switch. The power indicator will go out.
Last unplug the power cable.
LIGHT
COMPONENT
POWER
COMPUTER
VIDEO
MENU CANCEL
COMP.V
COMP. DVI
S-VIDEO
ENTER
decrease volume increase volume
CAUTION
Do not unplug the power cable from the wall outlet or do not turn
off the main power under any one of the following circumstances.
Doing so can cause damage to the projector:
• While the Hour Glass icon appears.
• While the message "Please wait a moment." appears. This mes-
sage will be displayed after the projector is turned off.
• While the cooling fans are running. (The cooling fans continue
to work for 90 seconds after the projector is turned off).
• While accessing a PC card. (The PC Card Access indicator lights.)