Nokia 2355 - Manual (Page 55)

Copyright © 2006 Nokia. All rights reserved.
S e t t i n g s
45
■ Voice commands
You can set as many as 10 voice
commands, which allow hands-free
operation of certain phone features.
Add a voice command
Before using voice commands, you
must first add a voice tag to the phone
function.
1. In standby mode, select Menu >
Settings > Voice commands .
2. Select the phone function you wish
to tag ( Profiles , Voice mailbox ,
Radio , Voice recorder , or Call
register ).
3. If necessary, select an option
associated with that function.
4. Select Options > Add command .
5. Select Start , and speak the voice
tag clearly into the microphone.
Note: Do not select Quit
unless you want to cancel the
recording.
The phone replays and then saves the
recorded tag. The icon appears
next to commands which have voice
tags assigned.
Activate a voice command
After you have associated a voice tag
with a phone function, you can issue a
command by speaking the voice tag.
1. Select and hold Go to .
2. When Speak now appears,
pronounce the voice tag clearly
into the microphone.
When the phone finds the voice tag,
Found: appears, and the phone plays
the recognised voice tag through the
earpiece. The function you requested is
activated.
Voice command options
After you have associated a voice tag
to a command, you can choose one of
the following options:
• Select Playback to listen to the
voice command.
• Select Change to change the voice
command.
• Select Delete to erase the voice
command.