Nokia 2355 - Manual (Page 40)

Copyright © 2006 Nokia. All rights reserved.
C o n t a c t s
30
3. Enter the number or text for the
type you have selected, and select
OK .
4. To change a number type ( General ,
Mobile , Home , Office , or Fax ),
select Change type in the options
list.
You can also change the default
number for the contact entry.
1. In standby mode, scroll to the
number you wish to change, and
select Details .
2. Scroll to the number you wish to
set as default, and select Options >
Set as default .
Voice dialling
You can dial up to 25 stored numbers
using voice dialling (voice tags).
Before using voice tags, note that:
• Voice tags are not language
dependent. They are dependent on
the speaker’s voice.
• You must say the name exactly as
you said it when you recorded it.
• Voice tags are sensitive to
background noise. Record voice
tags and use them in a quiet
environment.
• Very short names are not accepted.
Use long names and avoid similar
names for different numbers.
Note: Using voice tags may be
difficult in a noisy
environment or during an
emergency, so you should not
rely solely upon voice dialling
in all circumstances.
Assign a voice tag to an entry
Before you can use voice dialling, you
must first assign a voice tag to the
number.
1. In standby mode, scroll down to
enter the contacts list.
2. Highlight the contact you want to
assign a voice tag, select Details >
Options > Add voice tag > Select >
Start .
3. Speak clearly into the microphone.
Note: Do not select Quit
unless you want to cancel the
recording.
The phone automatically stops
recording and saves and replays the
voice tag. The icon appears next to
commands which have voice tags
assigned.
If recording is not successful, your
phone displays an error message.
Select Options > Add voice tag and
repeat Step 3.