Nokia 2355 - Manual (Page 35)

Copyright © 2006 Nokia. All rights reserved.
M e s s a g e s
25
Dial 2145551212, pause 5 seconds,
press 1, pause 2 seconds, press
1234, press #.
Be precise; you will need this
information in “ Setup voice mail with
dialling codes ”, p. 25 .
Insert dialling codes
Press * repeatedly to cycle through
dialling codes. Once the desired code
appears in the display, pause briefly
and the code is inserted into the
dialling string.
The following dialling codes are
available:
*—Bypasses a set of instructions.
p—Pauses for 2.5 seconds before
sending any numbers that follow.
w—Waits for you to press the call key
before sending the numbers or codes
that follow.
Setup voice mail with
dialling codes
1. In standby mode, select Menu >
Contacts > Speed dials .
2. Scroll to an empty speed dial slot
and select Assign .
3. Enter your voice mailbox number,
including the area code.
4. Refer to dialling codes and enter
any codes as necessary using the
information that you wrote down
from “ Write down voice mailbox
number and process ”, p. 24 .
For example, if you pause for 5
seconds after connecting to voice
mail, enter p twice after the voice
mailbox number, for example,
2145551212pp.
5. Enter any remaining pauses or
other information that allows you
to listen to your messages, and
select OK .
6. Enter a name (such as Voice Mail),
and select OK .
To dial and listen to your voice mail,
press and hold the assigned speed dial
key while in standby mode.
If speed dialling is off, the phone
displays a prompt asking if you would
like to turn it on.
■ Minibrowser
messages
Minibrowser messaging is a network
service. See “ Network services ”, p. viii
for more information.
If your wireless service provider or
network operator supports this feature,
you can check for e-mail messages
using the minibrowser. In standby
mode, select Menu > Messages >
Minibrowser messages , and select
Connect .