Nokia 2355 - Manual (Page 52)

Copyright © 2006 Nokia. All rights reserved.
S e t t i n g s
42
Automatic redial
Occasionally, your network may
experience heavy traffic, resulting in a
fast busy signal when you dial.
With automatic redial activated, your
phone redials the number (number of
redials depends on your wireless
service provider or network operator),
and notifies you once the network is
available.
In standby mode, select Menu >
Settings > Call settings > Automatic
redial > On or Off .
Speed dialling
You can activate or deactivate speed
dialling. For more information, see “ Set
up speed dials ”, p. 32 .
Automatic update of service
You can set the phone to automatically
receive updates from your wireless
service provider or network operator
that may improve coverage and
performance.
In standby mode, select Menu >
Settings > Call settings > Automatic
update of service > On or Off .
Calling card
If you use a calling card for long
distance calls, you can save the calling
card numbers in your phone.
Your phone can store up to four calling
cards.
Save information
1. In standby mode, select Menu >
Settings > Call settings > Calling
card .
2. Enter your security code, and select
OK . (See “ Security settings ”, p. 49
for more information.)
3. Scroll to one of the four memory
locations, and select Options >
Edit > OK > Dialing sequence .
4. Select one of the following
sequence types:
Access no.+ phone no.+ card no. —
Dial access number, phone number,
then card number (+ PIN if
required).
Access no.+ card no.+ phone no. —
Dial access number, card number
(+ PIN if required), then phone
number.
Prefix+ phone no.+ card no. —Dial
the prefix (numbers that must
precede the phone number) and
phone number you want to dial,
then card number (+ PIN if
required).