Nokia 2355 - Manual (Page 34)

Copyright © 2006 Nokia. All rights reserved.
M e s s a g e s
24
Call and setup your
voice mail
1. Once you have saved the voice
mailbox number, press and hold 1.
2. When you connect to voice mail
and the prerecorded greeting
begins, follow the service’s
automated instructions to setup
your voice mail.
Listen to your voice
messages
Once you have set up voice mail, you
can dial the voice mailbox number in
one of four ways:
• Dial the voice mailbox number
using the keypad.
• Press and hold 1.
• Select Listen if there is a
notification message in the display.
• In standby mode, select Menu >
Messages > Voice messages >
Listen to voice messages .
Once you connect and the prerecorded
greeting begins, follow the automated
instructions to listen to your voice
messages.
Clear voice mail icon
To clear the new voice mail icon from
standby mode, select Menu >
Messages > Voice messages > Clear
voice mail icon .
Automate voice mail
You can insert special characters called
dialling codes into phone numbers
such as voice mail, and save the
number to a speed dial location.
Dialling codes instruct the receiving
system to pause, wait, bypass, or
accept the numbers that follow them
in the dialling string.
Note: Voice mail services vary
by service provider.
The following instructions are
examples of common
operations. Please check with
your service provider for
specific instructions for using
your voice mail service.
Write down voice mailbox
number and process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
3. Write down your interaction with
the recorded prompts step-by-step.
Keep in mind that each voice mail
service may vary. However, it
should look something like this: