National Instruments E Series User Manual

Page 124

Index

DAQCard E Series User Manual

I -2



National Instruments Corporation

block diagrams

DAQCard-AI-16E-4, 3-1
DAQCard-AI-16XE-50, 3-2

bulletin board support, F-1

cables.

See also I/O connectors.

custom cabling, 1-5 to 1-6
field wiring considerations, 4-44
optional equipment, 1-5
part numbers for connectors, 1-6

calibration, 5-1 to 5-3

adjusting for gain error, 5-3
external calibration, 5-2 to 5-3
loading calibration constants, 5-1 to 5-2
mixing unipolar and bipolar channels

(note), 3-5

power-management modes (table), E-2
self-calibration, 5-2

Card and Socket Services, C-1
charge injection, 3-8
clocks, DAQCard, 3-14
commonly asked questions.

See questions and

answers

common-mode signal rejection, 4-20
configuration.

See also input configurations.

questions about, D-2
software configuration, 2-2 to 2-3

connectors.

See I/O connectors.

CONVERT* signal

signal routing, 3-13

multiplexer for controlling

(figure), 3-13

timing connections, 4-33 to 4-34

input timing (figure), 4-33
output timing (figure), 4-34

counter power-management modes

(table), E-2

current, saving, A-12, C-2
customer communication,

xiv

, F-1 to F-2

DAQCard clocks, 3-14
DAQCard E Series.

See also hardware

overview

custom cabling, 1-5 to 1-6
features, 1-1
getting started, 1-2
optional equipment, 1-5 to 1-6
questions about, D-1 to D-5
software programming choices

LabVIEW and LabWindows/CVI

application software, 1-2 to 1-3

NI-DAQ driver software, 1-3 to 1-4
register-level programming, 1-4

unpacking, 1-6

DAQ-STC system timing controller, 1-1, D-1
data acquisition timing connections,

4-24 to 4-36

AIGATE signal, 4-34 to 4-35
CONVERT* signal, 4-33 to 4-34
EXTSTROBE* signal, 4-27
SCANCLK signal, 4-26
SISOURCE signal, 4-35
STARTSCAN signal, 4-30 to 4-33
TRIG1 signal, 4-27 to 4-28
TRIG2 signal, 4-29 to 4-30
typical posttriggered acquisition

(figure), 4-25

typical pretriggered acquisition

(figure), 4-25

UISOURCE signal, 4-36

DGND signal

DAQCard-AI-16E-4 (table), 4-6
DAQCard-AI-16XE-50 (table), 4-8
description, 4-3
digital I/O connections, 4-21
timing I/O connections, 4-23

DIFF (differential) input mode

definition (table), 3-3
description, 4-14