NETGEAR DG834GUV5 - Manual (Page 27)

DG834GUv5 Wireless Router with Built-in DSL Modem User Manual
Configuring Your Wireless Network and Security Settings 2-5
v1.0, May 2009
The settings for this screen are explained in Table 2-1 on page 2-6 .
3. Select the region in which the modem router will operate.
4. For initial configuration and test, leave the other settings unchanged.
5. To save your changes, click Apply.
6. Configure and test your computers for wireless connectivity. After testing your wireless
connectivity, select a security method (see “Configuring Your Wireless Security” on page 2-7 ).
Program the wireless adapter of your computers to have the same SSID and wireless security
settings as your modem router. Check that they have a wireless link and are able to obtain an
IP address by DHCP from the modem router. If there is interference, adjust the channel.
Figure 2-2