NetComm SmartVoice Gateway - Manual (Page 4)

4 SmartVoice Gateway(s) User Guide
YML832 Rev1
1. Introduction
Product Overview
The NetComm SmartVoice series of stand-alone VoIP Gateways carry both voice and facsimile over
an IP network. They support the SIP industry standard call control protocol to be compatible with free
registration services or VoIP service providers’ systems and they work in two different modes: UA (User
Agent) or Server. As a standard user agent, the gateways are compatible with all well-known Soft
Switches and SIP proxy servers. With optional server software, the gateways can also be configured to
establish a private VoIP network over the Internet without a 3
rd party SIP Proxy Server.
Each of the SmartVoice series VoIP gateways have a different combination of FXS and FXO ports; FXS
ports are used to connect directly to a telephone set and FXO ports are used to connect directly to PSTN
lines. There are a number of SmartVoice Gateway models available with 4 ports, 8 ports, 16 ports and
32 ports combinations. The gateways can be seamlessly integrated into existing networks by connecting
to a phone set, PBX, key telephone system, fax machine or PSTN line. With only a broadband connection
such as an ADSL bridge/router, Cable Modem or leased line router, the gateways allow you to gain
access to voice and fax services over an IP network thereby reducing the cost of international and long
distance calls.
In addition, each gateway includes an in-built 4 port Ethernet switch which supports comprehensive
Internet gateway functions to accommodate other PCs or IP devices to share the same broadband
stream. The QoS function allows voice and data traffic to flow through at the highest priority. and with
TOS/DiffServ bit enabled, it guarantees that voice packets will have the first priority to pass through a
TOS/DiffServ enabled router.
With the support of DDNS, the gateways are reachable by a domain name where the IP address is
dynamically assigned by the ISP, thereby allowing users to host a web site or mail server in a PPPoE or
DHCP network.
Each gateway can be assigned with a fixed IP address or by DHCP, PPPoE, adopting the G.711, G.726,
G.729A or G.723.1 voice compression format to save the network bandwidth while providing real-time
and toll quality voice. In addition, in the event that the power supply fails or the Internet connection is
lost, each gateway can divert the FXS lines to the PSTN network on the FXO ports so that users can still
use their conventional PSTN line to make calls.
IMPORTANT SAFETY INSTRUCTIONS
• When using your telephone equipment, basic safety precautions should always be followed
to reduce the risk of fire, electric shock and injury to persons, including the following:
• Avoid using a telephone (other than a cordless type) during an electrical storm. There
may be a remote risk of electric shock from lightning.
• Do not use the telephone to report a gas leak in the vicinity of the leak.
• Use only the power cord indicated in this manual.