NetComm SmartVoice Gateway User Manual
Page 32
32
SmartVoice Gateway(s) User Guide
YML832 Rev1
• Proxy Server Realm: This is used for gateway SIP account authentication in a SIP server. In most
cases, the gateway can automatically detect your SIP server realm. So you can leave this option as
blank. However, if your SIP server requires you to use a specific realm you can manually type it in
here. If you fail to make a call, please contact your VoIP service provider.
• TTL: Enter the desired time interval at which the gateway will report to your Proxy Server.
• SIP Domain/Use Domain to Register: Enter the correct SIP domain to avoid registration failure (it
is not necessary to set this with some Proxy Servers). If you enable “Uses Domain to Register” the
VoIP Gateway will register to Proxy with the domain name you filed. Alternatively, the VoIP Gateway
will register to a Proxy with the IP it resolves. If you fail to make a call, please contact your VoIP
service provider.
• Bind Proxy Interval for NAT: This function is able to keep the binding is existed when VoIP
Gateway is behind NAT and SIP Proxy is not able to keep the binding.
• Initial Unregister: After rebooting, it is unregistered first and then do the general register process.