NetComm SmartVoice Gateway User Manual
Page 22
22
SmartVoice Gateway(s) User Guide
YML832 Rev1
BigPond
Click “BigPond Cable”. Enter User Name and Password and then click the “Accept” button at the bottom.
DNS Settings
Domain Name Server (DNS): While a gateway is accessing another gateway or computer with a
hostname, it will look up the IP address from the DNS provided by the ISP. The ISP whilst negotiating
with PPPoE or DHCP usually assigns the DNS information. In the case that the DNS is not assigned
automatically or WAN port is assigned with a static IP address, the DNS information must be assigned
manually.
Auto
Gateway uses primary & secondary DNS addresses from
ISP’s DHCP server or PPPoE server.
Manual
Enter the primary & secondary DNS addresses manually.
Please be sure the IP addresses are correct otherwise the
gateway will not be able to access any hosts with their
hostname.
Clone MAC
Some Internet Service Providers (ISP) assign the bandwidth via the MAC (Media Access Control) address.
You can click the “Clone” button to type in a MAC address which is recognized by ISP. It is only necessary
to fill in the field if required by your ISP.
The “Your MAC Address” will be blank as you log in through WAN port.