NetComm SmartVoice Gateway - Manual (Page 33)

SmartVoice Gateway(s) User Guide 33
YML832 Rev1
FXS/ FXO Representative number registers to Proxy:
Assuming that your registered ID and password are individual, the settings should be as above:
• FXS Representative Number: Register all FXS ports as a hunting group.
• FXO Representative Number: Register all FXO ports as a hunting group.
All the grouped FXO ports will be hunted automatically. It is available when FXO registers to Proxy.
• Register: Register to Proxy if ticked.
Hunting pattern of grouped FXS/FXO ports will be based on the hunting policy you specified on page 33.
NOTE: Please contact your VoIP provider about whether they can provide
reprehensive numbers to allow you to use them for more than one FXS and FXO
ports. FXS and FXO reprehensive numbers should be different.
Each line registers to Proxy independently:
• Number: VoIP phone number
• User ID/Account: VoIP account Authentication ID or account name
• Password: password for VoIP account authentication
• Invite with ID / Account: VoIP gateway can be invited to a VoIP trunk gateway w/o registering with
a Proxy. Please contact your VoIP provider.
As there are various Proxy Server providers, NetComm has designed the gateway to be compatible with
as many SIP VoIP networks as possible, and according to RFC standards. If any registration problem
occurs, please consult your VoIP provider.
NOTE: When you register with a Proxy Server, dialing principles may vary with
different Proxy Servers, especially when dialing through a FXO port. Please consult
your VoIP Service Provider for details.